100W 24V Dimmable LED Driver, Triac & 0-10V

Name: 100W 24V Dimmable LED Driver, Triac & 0-10V
SKU: P-100-24-D-ETL
Price: 60.42 USD
Availability: InStock

$60.42

In Stock — 226 available

Quantity: 1 · Unit: Each (ea)

Shipping options and charges are confirmed at checkout. Freight quotes are shown separately. Contact the showroom to confirm branch stock before visiting.

24V
100W

Purchased in 1,097 fulfilled orders over the last 24 months

100W constant-voltage output at 24VDC, 0-4.2A rated current
Triac and 0/1-10V dimming supported from a single driver
170-264VAC input at 50/60Hz with 85% full-load efficiency
Aluminum alloy housing, 230 x 50 x 30mm, 0.36kg
Hiccup-mode short circuit and overload protection with auto recovery
ETL listed and CE marked, IP20 rated for indoor installation

At a glance

IP rating: IP20
Product Dimensions: 230x50x30mm
Dimmable: Yes
Beam angle: 10°
Dimmer Type: Triac and 0/1-10V
Power Supply Input: 110 - 250VAC

Some technical details are being checked. Confirm requirements before choosing connected components.

Datasheet (PDF)

CE
ETL Listed

Check delivery costs and freight exceptions
Confirm Doral pickup readiness
Ships from Miami, FL
Check this product's warranty terms

Need volume pricing?

Typical applications

Retail and hospitality cove lighting
Architectural LED strip runs
Millwork and display case lighting
Commercial interior accent lighting
Light industrial fixture retrofits

This is a 100W constant-voltage LED driver with a 24VDC output, intended for dimmable LED lighting installations in commercial and light industrial settings. It supports both Triac and 0/1-10V dimming protocols for compatibility with a range of dimming controls, LED strip runs and fixture loads. The driver accepts 170-264VAC at 50/60Hz and delivers a rated output current of 0-4.2A at 24V, with ripple and noise held to 150mVp-p. Full-load efficiency is rated at 85%, and short-circuit and overload protection operate in hiccup mode with automatic recovery. The aluminum alloy enclosure measures 230 x 50 x 30mm, weighs 0.36kg and carries an IP20 rating for indoor use. The unit is ETL listed and CE marked, with EMC immunity referencing EN55015:2013, EN61547:2009, EN61000-3-2:2014 and EN61000-3-3:2013. A 3-year warranty applies.

Optical
Beam angle	10°
Mechanical
Product Dimensions	230x50x30mm
Material	Aluminum Alloy
Weight	0.79 lb
Environmental
IP rating	IP20
Ambient Operating Temperature	-30–50 °C(-22–122 °F)
Operating Humidity	20-60% RH, non-condensing

Electrical
Wattage	100 W
Dimmable	Yes
Dimmer Type	Triac and 0/1-10V
Power Supply Input	110 - 250VAC
Power Supply Output	24VDC
Compliance
Certifications	ETL
Ordering
Warranty	3 y