60W IP67 Constant Voltage LED Driver, 24VDC/2.5A, 170–240VAC Input, Outdoor Rated

The P-S60-24-ETL is a 60W constant-voltage LED driver designed for outdoor and wet-location installations. Configured for 24VDC output, it is suited for powering LED strip lighting, signage, and architectural lighting systems where a stable, regulated supply is required in exposed environments. The driver delivers 24VDC at up to 2.5A across a 170–240VAC input range at 50/60Hz, with a full-load efficiency of 86%. Short-circuit and overload protection operate in hiccup mode with automatic recovery. An IP67 ingress protection rating confirms dust-tight and water-immersion resistance. Operating temperature range is -20°C to +50°C, with over-temperature shutdown at 100°C ±10°C. Dimensions are 175 × 58 × 25mm and unit weight is 0.42kg. The P-S60-24-ETL carries CE marking and is RoHS compliant. EMC immunity is referenced to EN55015:2013, EN61547:2009, EN61000-3-2:2014, and EN61000-3-3:2013. Note that final EMC compliance must be verified at the system level by the equipment manufacturer. Warranty terms should be confirmed with your Poli LED & Signs account representative.