1–5 Port Press-On Wire Connector, 250 V 32 A, 10–28 AWG, Polycarbonate Housing

USD 4.72

Disponible — 500 disponibles

Rated 250 V and 32 A for line-voltage branch and fixture wiring

Push-in spring termination seats conductors without tools

Polycarbonate housing in grey with nickel-chromium alloy steel spring

Soft wire acceptance from 24 AWG to 10 AWG (0.08–4 mm²)

Hard wire acceptance from 24 AWG to 12 AWG (0.08–4 mm²)

Operating range of -40 °C to +105 °C, 8–12 mm strip length

Retiro el mismo día en Doral

The 1–5 port press-on wire connector provides tool-free conductor terminations in commercial and industrial wiring. The push-in spring mechanism accepts both soft and hard wire, making it suitable for fixture wiring, junction work, and panel terminations where reliable conductor retention is required. The connector is rated for 250 V and 32 A. Soft wire acceptance ranges from 24 AWG to 10 AWG (0.08–4 mm²); hard wire from 24 AWG to 12 AWG (0.08–4 mm²). The housing is polycarbonate and the spring contact is nickel-chromium alloy steel, with an operating range of -40 °C to +105 °C. Recommended strip length is 8–12 mm.