Free shipping on orders over $300 — continental US

P-96-D-24-C2-UL
Ordered by 1 customer in the last 24 months
The PMA-J Series 96 W driver is a constant-voltage dimmable LED power supply for 24 V DC tape light, linear fixtures, cove details and signage. The aluminum housing is rated IP65 for dry, damp and wet locations and mounts flat, on its side or vertically using tabs on the left and right sides. Output is 24 V DC at 4 A with ±0.5 V voltage tolerance, ±1% load regulation and a 4000 Hz constant-frequency PWM waveform. Dimming covers Triac forward and reverse phase, MLV, ELV, 0-10 V, 1-10 V, 10 V PWM and onboard potentiometer control over a 0.1-100% flicker-free range, and a fine-tuning knob adds up to +1 V to offset voltage drop. Short-circuit, over-load and over-temperature protection are built in, with a -40 to +60 °C case temperature range. EMC emissions comply with FCC Part 15 Subpart B. Backed by a 3-year warranty.
| Electrical | |
|---|---|
| Operating Voltage | 110–277 V |
| Wattage | 96 W |
| Maximum Current | 4 A |
| Dimmable | Yes |
| Dimmer Type | Triac + 0-10V |
| Environmental | |
| IP rating | IP65 |
| Environmental Rating | Non-Waterproof |
| Ambient Operating Temperature | -40–60 °C(-40–140 °F) |
| Operating Humidity | 20-95% RH non-condensing |
| Mechanical | |
|---|---|
| Product Dimensions | 28*25*22.5CM |
| Finish | Black |
| Material | Aluminum |
| Mounting | Flat, side or vertical mounting via side tabs |
| Weight | 1.98 lb |
| Ordering | |
| Warranty | 3 y |
Full manufacturer specifications, dimensions and wiring detail.
Download datasheetNo reviews yet. Be the first to review this product.
Some technical details are being checked. Confirm requirements before choosing connected components.
Need volume pricing?