M-Z-CON3D-CA10mm
3-Pin Strip-to-Strip Bridge Connector, 10mm IP20 SMD, 150mm 22AWG
- Bridges two 10mm-wide SMD strip segments with a 3-pin solderless connection
- 150mm length of 22AWG PVC-jacketed wire in red/white/yellow
- Rated DC 3V to 24V operating voltage at up to 3.5A current draw
- IP20 environmental rating for non-waterproof, indoor strip installations
- UL listed under file number E536464
- Packaged 5 pieces per bag for stocking and job-site distribution
- Retiro el mismo día en Doral
- Envíos desde Miami, FL
- Garantía del fabricante incluida
The M-Z-CON3D-CA10mm is a 3-pin strip-to-strip bridge connector designed for use with 10mm IP20 SMD LED strip installations. It provides a solderless method of linking two strip segments, simplifying layout and reducing installation time in commercial and architectural lighting applications. The connector uses 150mm of 22AWG PVC-jacketed wire in a red/white/yellow configuration and is rated for operation from DC 3V to 24V at a maximum continuous current of 3.5A. It is compatible with IP20-rated, non-waterproof strip assemblies only, with a rated LED lifetime of 50,000 hours. Supplied in bags of 5 units. The connector carries UL certification (file number E536464) and is backed by a 1-year warranty.
Opiniones de clientes
Aún no hay opiniones. Sé el primero en opinar sobre este producto.
