B-W2A-GO
Acoustic Wood Slat Wall Panel, Grey Oak Veneer on MDF, 94.49" x 23.62", 2-Pack
- Natural Grey Oak veneer over MDF core with recycled polyester felt backing
- Panel size 2400 x 600 x 21mm, supplied two units per pack
- Absorption coefficient peaks at 1.09 at 2kHz per DS/EN ISO 354:2003
- 1.06" (27mm) slat width with 0.51" (13mm) gap between slats
- IP20 rated for dry indoor installation, non-waterproof construction
- CE marked, 28 lb per panel for adhesive or screw-assisted mounting
- Califica para envío gratis
- Retiro el mismo día en Doral
- Envíos desde Miami, FL
- Garantía del fabricante incluida
The B-W2A-GO is an indoor acoustic wood slat wall panel built from an MDF core with a Natural Grey Oak veneer face and a recycled polyester felt backing. Panels measure 94.49" x 23.62" x 0.83" (2400 x 600 x 21mm) and ship two units per pack for interior wall and ceiling treatments where sound control and finish quality are both required. Slat width is 1.06" (27mm) with a 0.51" (13mm) gap. Sound absorption measured per DS/EN ISO 354:2003 in a reverberation room rises from 0.09 at 250Hz to 1.09 at 2kHz, placing performance in the mid-to-high frequency range. Panels install with adhesive applied to the felt backing, and cut slat ends are secured with 15mm screws. Unit weight is 28 lb. Rated IP20 and non-waterproof for dry interior use. CE marked.
Opiniones de clientes
Aún no hay opiniones. Sé el primero en opinar sobre este producto.
